Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal    Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal

Good condition with some scratches, small dents, a little rust and paint wear. It is sound and solid. Signed Gingher Mfg Co Scranton Pa and it is quite similar to the Office Valet made by Vogel Peterson Chicago. I don't know what color to call it--a cross between light brown and dark tan. It is 76 1/2" tall with the top storage part being 24" wide with the shelves themselves being 10 1/2 deep. Base is 29 7/8" wide by 18" deep and has 4 holes in it for putting umbrellas or canes and 6 slots in the lower upper rack for hangers. The bottom goes back together with one long bolt and then you fasten the lower center pole on with 2 large metal screws.
You put the shelves back on the upper center pole first with 3 long bolts in the middle of each shelf then fasten the side rails onto the shelves with the small bolts. Last you slip the upper center pole into the lower one and tag them together with the last long metal screw. I cleaned it up some but it is still a little dirty from the old office that it came from. Also you will need a bolt and nut for the lowest rack in the center as it has gone missing.
Should be a 1/4" bolt about 2" long. The items I sell Might or Might not be from a smoke free home. Most items are used and vintage and smoking occurred in almost 50% of the homes in the US at one time. Don't ask me to smell them because I cannot. 1 3/4 hours from Washington DC. 10 minutes off of Exit 4 of Interstate 83 in Pa. You pay them--I do not. We try very hard to represent items we sell as accurately as possible. We always supply unaltered photographs which are clear. We do not grant an inspection period, requests must be made at time you receive the package.
If your item was damaged in transit then it would be handled in accordance with the shippers claims procedures. The item "Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal" is in sale since Saturday, July 15, 2017. This item is in the category "Collectibles\Kitchen & Home\Furniture\Other Collectible Furniture".
The seller is "keepit-simple" and is located in Stewartstown, Pennsylvania. This item can be shipped to United States.
  • Country/Region of Manufacture: United States

Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal    Vintage Industrial Coat/Hat/Umbrella Rack Stand w Shelves Hall Tree Metal